24 HOUR ONLINE SHOP

  Top Mounts

Compbrake suspension top mounts are available as adjustable top mounts or fixed top mounts. Both Types of top mounts are fitted with a high quality race bearing to ensure a positive top mount location.
Adjustable top mounts are designed to adjust the caster and camber by rotating the top mount through a series of pre drilled threaded holes so the desired amount of suspension geometry can be adjusted and secured.
Fixed top mounts or Known as direct replacement top mounts offer advantages over standard rubber top mounts fitted with needle roller bearings which breakdown and wear very quickly in competition. Top mounts fitted with Spherical race bearings offer a precise location keeping the geometry fixed with out any unwanted caster camber angle changes and gives the freedom of movement through the specially chosen top mount high angular bearing which is housed in the aluminium top mount.
Each top mount is carefully manufactured from billet 6062 grade aluminium offering strength and lightness.
Suspension top mounts relieve the stress and tension that is put on the suspension and steering parts and give a more positive feel to the handling in high speed cornering when in competition.
Both fixed top mounts and adjustable top mounts are a direct replacement fit and our supplied with top mount sleeve nuts and top mount step down sleeves, designed for each cars suspension application.
The added benefit of compbrake top mounts is that you instantly feel an improved response in performance handling.
Suspension top mounts fitted with purpose selected bearings will not impair the quality of the ride but as with all suspension parts care has to be taken.

Adjustable top mounts are better used with coil over narrow tarmac springs like 1.9mm or 2.25 as this allows the top mount to be fitted were maximum adjustment can be achieved and allows more space under the inner wings (production cars only) were a fixed top mount is secured using the existing holes in the cars inner wing were the original top mount was located top mounts that are fixed maintain the factory geometry settings but with all the added improved benefits

If your vehicle is not listed we can design and manufacture an adjustable top mount of a fixed position top mount in house.

 The UK's Leaders in High Performance Braking Accessories. CompBrake are the Number 1 suppliers of UK Performance Brake Components and Brake Kits. Designed for Competition racing and rally use, we are specialists in motor sport braking;We supply parts from; Performance Brakes to Brake Components, Brake Kits, Motorsport Brakes, Brake Conversions,
Subaru Performance Brakes,Brake Pads and Calipers,and Rally Brake Kits.All our products assist with Engine braking, performance technique regenerative braking, braking resistor, dc braking, dynamic braking, motor braking, speed technique, torque braking, torque technique, turbo technique, braking techniques, breaking technique,

Motorsport parts for competition braking

 A complete brake design service for upgrading brakes with four pot callipers and six pot callipers. For our braking upgrade we use racing brake discs bias pedal boxes floor mounted pedal boxes, bias controllers universal pedal boxes remote master cylinders, integral master cylinders girling master cylinders servo bias brakes racing rotors and racing rotars racing rotors our race brakes for our upgrade brake kits have grooved discs which are vented discs and directional vaned rotor discs using hawk brake pads for motor sport frictional braking.

 Our performance brake parts for racing brakes for use for rally brakes and race brakes and a range of racing brake accessories covers all motorsport braking including Subaru brake kits ford brake kits VW brake kits golf brake kits, BMW brake kits Peugeot brake kits lancia brake kits racing brakes kit car brakes are just a selection of our brake and brake calliper design. Clubman specials.

 For 2007/08 we are developing fiat performance brake parts rear Subaru brakes rear brake kits with big brakes mitsubishi evo brake kits using the big reds and racing discs. Our range of products includes vertical handbrakes  fly off handbrakes bias valves which are adjustable brake bias valves servo assisted brake bias residual pressure valves cool brake fluid re-circulator, racing brake fluid, performance brake fluid. Clevis brake reservoir, girling reservoir, reservoir moisture seal, balance bar, brake bias balance bar are just some of the products compbrake supply. Comp brake pedal boxes and master cylinders from 0.625, 0.7 and 0.75. Brake ducting brake ducts hydraulic handbrake vertical handbrake braided brake hoses. Comp brake racing callipers. Brake features are a unique

Composition of dampened iron casting for optimum rotor wear balance and reliability. Brake fade virtually eliminated. Exclusive vane design disperses heat and gasses faster plus maintaining a clean pad surface. Excellent performance and cooling characteristics. Vanes serve to reinforce the rotor and guard against warping. Angles curved vanes direction of rotation L/h & R/h to further enhance performance. Supplied to leading competition car builders. Suitable for international rally applications and racing formula cars exceeding 500bhp.

 Before we launched these quality products we worked very closely with British and European rally championship contenders, who have put them through hard tests in motorsport. Our brakes are tested with cars exceeding 500 brake horse power. Our collection of escort fabrication parts like performance brakes for group 4 escort includes 4 link kits watts linkage adjustable track control arms, supplied with heavy duty rod end bearings world cup cross members compression strut kits.

 It could be said that friction material is the most important component in a braking system. After circuit testing many friction materials our best results came from compbrake circuit racing brakes using Hawk performance brake pads.

 Our range of racing suspension parts includes competition suspension top mounts which are spherical bearing top mounts. Offer castor and camber adjustments. Complete with race bearings  Lightweight fuel tanks.

compbrake.compression strut kits adjustable track control arms improve the handling with ease with the insitu adjuster built in especially when spring conversion kits are used to  lower the car and  for  safety adjustable trackrod ends fitted with ½ x 5/8 heavy duty rod end bearings

Compbrake is proud to  be a british manufacturer of competion racing  brake parts  that are engineered to win .and twenty five year s of motorsport design and development to race teams rally car preparation businesses supplying  motorsport distributors and motorsport trade parts distributors and performance race car parts shops  as well as brake advisors on the forums keeps us number one in the uk with all our  staff being motorsport enthusiasts and can give advise on braking and stopping a high performance car  hot rod  rally car race car or trackcar. Racing and circuit wheel hubs.

Our motorsport   lotus elise trackday car is always available for circuit testing fitted with elise4 track parts and brake kits for elise a full of motorsport catalogue is available on request and full technical support.